Hi, my current os win7 is installed on to a SATA SSD, i am planning to migrate by cloning a disk image and recovering it to the 970 Evo, i have read some conflicting information Samsung driver installation PDF suggests that raid mode in the pch should be disabled but i have read elsewhere it has to be enabled to get the full performance from the PCIe lanes? can anyone tell me what settings in the system bios i need to change, before i do this, current system disk boots in legacy MBR mode, so that will also require to be converted to uefi /gpt and of course will need to be bootable

Change Boot Drive To Ssd

Driveeleasysite

Change Ssd To Boot Drive

Change

Changing Ssd To Boot Drive

If the source HDD or SSD is MBR with BIOS boot mode but the cloned/migrated SSD is GPT, you need first make SSD as boot drive first in BIOS and then change the boot mode to EFI to ensure proper startup. Bonus Tips after Setting SSD as Boot Drive. Next, access your BIOS, change boot priority for the SSD and set the boot mode to UEFI or In some BIOS, disable CSM. NOTE: To avoid typing error, just copy and paste the commands to the Admin command prompt windows. F59phi. In this episode, Linus answers the frequently asked question about how to properly configure the SSD + HDD setup. He covers boot sequence configuration, driv.

Coments are closed
Scroll to top