1. Windows Error 1068 free download - Error Messages for Windows, Error Fixer, Viber for Windows, and many more programs.
  2. What I did was, I opened Add Program, and I checked the checkbox for Internet Information Services in the left pane Turn Windows features on or off, which made Internet Information Services (IIS) Manager inside Administrative Tools.

For reference, Error 1068 is a Microsoft error from attempting to start the service, not a Malwarebytes error. You can also check the required dependencies for any service on your machine by opening up the Services console, double click the service, and going to the dependencies tab.

The DHCP Service May Give Error 1068 Due to a Setting in the Registry.

When you try to start the Dynamic Host Configuration Protocal (DHCP) client service, you may receive either of the following errors:

  • Error: Could not start the DHCP Client Service on local computer
  • Error 1068: The dependency service or group failed to start

In addition, the IP address of the computer may be 0.0.0.0. To resolve this issue, you will need to edit the registry.


Edit the DHCP Key in the registry in Microsoft Windows XP.

  1. Click Start, and then click Run.
    The Run window appears.
  2. Type regedit, and click the OK button.
    The Registry Editor window appears (Figure 1).

    Figure 1 - Registry Editor (click to enlarge)

  3. Double-click HKEY_LOCAL_MACHINE.
    The HKEY_LOCAL_MACHINE subfolders appear.
  4. Double-click System.
  5. Double-click CurrentControlSet.
  6. Double-click Services, and scroll down to the Dhcp folder.
  7. Left-click Dhcp.
    The Dhcp subkeys appears in the right pane.
  8. Double-click DependOnService.
    The Edit Multi-String window appears.
  9. Highlight SYMTDI, and press the <Delete> key.
    The value is deleted.
    NOTE: If a blank line appears at the end of the list, click the blank line and press the <Backspace> key.
  10. Click the OK button and close the Registry Editor.
  11. Restart the computer.

Summary :

When you try to run Network and Sharing Center or Windows Defender Firewall, it shows “error 1068: the dependency service or group failed to start”? There could be various reasons responsible for this problem. MiniTool Partition Wizard offers you some solutions to fix error 1068. Feel free to have a try!

Quick Navigation :

What Is Error 1068

There are two cases in which you may encounter error 1068 in Windows 10.

  1. Case one: When you run Network and Sharing Center, it shows “Error 1068: The dependency service or group failed to start”. If you are affected by this issue, you will be incapable of connecting to the internet on any network no matter whetheryou use an Ethernet cable or connect it
  2. Case two: Error 1068 when starting Windows Firewall. Sometimes the message “Error 1068- dependency service failed to start firewall” pops up when you try to turn on your Windows Defender Firewall. Do not turn a blind eye to it because disabling Windows Firewall makes your computer exposed to unauthorized access.

How to fix “error 1068: the dependency service or group failed to start”?

If you see the problem for the first time, you can restart your computer to remove it. However, if the error still shows after the operation, you need to troubleshoot it with the following solutions.

Fix Error 1068 in Case One

Services Error 1068 Windows 10capeselfie

Error 1068 Windows 10 Firewall

If you meet error 1068 when you use Network and Sharing Center, you can try these ways to fix it.

Solution 1: Enable Related Dependency Services

As you can see in this error message, there is something wrong with the dependency services and you need to make sure that all the related dependency services are enabled.

Here are the steps to solve dependency service failed to start.

Step 1: Press Win + S to open Search, and then input system configuration in the search box.

Step 2: Click System Configuration App in the search result to get into it.

Step 3: Click Services tab, and make sure you have checked all the following options.

  • Application Layer Gateway Service
  • Network Connections
  • Network Location Awareness (NLA)
  • Plug and Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Remote Procedure Call (RPC)
  • Telephony

Step 4: Click OK to confirm changes you have made, and then restart your computer.

After restarting your computer, you can open Network and Sharing Center and check whether error 1068 in Windows 10 has been fixed.

Solution 2: Modify Registry Key

If you still see the message “error 1068: the dependency service or group failed to start” after you enable related dependency services, you can try to use Registry Editor to fix the problem.

Note: Most users have removed error 1068 with Registry Editor, but you need to be careful while applying the solution. Do not enter a wrong value when you modify registry key because improper operation to the Registry may bring serious damage to your computer.

Step 1: Press Windows and R key at the same time to get into Run window.

Admin lista

Step 2: Type Regedit in the box and click OK to open Registry Editor.

Step 3: Navigate to the following path:

HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Dhcp

Step 4: Double-click DependOnService from the right pane.

Step 5: In the Value data text area, delete all the words exceptAfd”, and then click OK.

Step 6: Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > Eaphost.

Step 7: Double-click DependOnServices and delete everything in the Value data. Then click OK to confirm changes.

Step 8: Restart your computer and there should be no error message when you use Network and Sharing Center.

Solution 3: Repair Nlasvc.dll

A common reason for “dependency service failed to start” is corrupted or damaged nlasvc.dll.

Nlasvc.dll, also known as Network Location Awareness, is a type of Dynamic Link Library (DLL) file. It collects and stores configuration information for the network and notifies programs when this information is modified.

Error Code 1068 Windows 10

If there is something wrong with nlasvc.dll, any services that depend on it will fail to start, such as Windows and Sharing Center.

To repair nlasvc.dll, you can run SFC (System File Checker).

Run SFC to Restore Nlasvc.dll

Step 1: Open Run window and type cmd in the box. Then press Ctrl + Shift + Enter to run command prompt as administrator.

Step 2: Type sfc /scannow and hit Enter.

Then SFC will scan for nlasvc.dll issues and any other system file problems automatically.

Tip: If you lost data due to corrupted or missing system files, you can try data recovery with MiniTool Partition Wizard.

Solution 4: Reset TCP//IP to Default

If “error 1068: the dependency service or group failed to start” still cannot be fixed, you can try to reset TCP/IP to default.

Step 1: Run command prompt as administrator.

Step 2: Type the command “netsh int ip reset” to completely reset TCP/IP configuration and restore TCP/IP to its original state, and then hit Enter.

Step 3: Restart your PC and check whether Network and Sharing Center can run properly.

Fix Error 1068 in Case Two

“Error 1068 - dependency service failed to start firewall” is something you don’t want to experience. It is quite annoying that you cannot turn on your Windows Defender Firewall.

What can you do if you got the error “dependency service failed to start firewall”? Here are several solutions which may be helpful for you.

Solution 1: Change Service Settings

Step 1: Input services.msc in Run window.

Step 2: Right-click your Windows Defender Firewall and select Properties.

Step 3: Choose Start and then set the start-up type to Automatic.

Step 4: Select Apply and click OK.

Step 5: Restart your PC to save changes.

Solution 2: Expand Your Administrators Group

There is another free way to fix the error 1068.

You just need to open command prompt as admin and input the commands below.

  • net localgroup administrators localservice /add
  • net localgroup administrators networkservice /add
Tip: Don’t forget to press Enter after every command.

Now you have to restart your Windows and turn on Windows Defender Firewall to check whether “the dependency service or group failed to start” has been solved.

Solution 3: Update Your Network Adapter Driver

Network adapter driver that is out-of-data could also be a cause for “error 1068 - dependency service failed to start firewall”.

To update your Network adapter driver, you can follow these steps.

Step 1: Press Windows key and X at the same time.

Step 2: Select Device Manager from the list.

Step 3: Click the arrow before Network adapters to expand it.

Step 4: Right-click the driver which is currently used, and choose Update driver.

Step 5: Restart your computer to apply the changes.

You can read more details about how to update the Network adapter driver in this article: Top 4 Ways to Fix Slow Internet Speed on Windows 10.

Solution 4: Disable Your Antivirus Temporarily

If you are running a third-party antivirus software, it might be in conflict with your Windows Defender Firewall, and the error 1068 will stops you turning on Windows Defender Firewall.

You can turn your antivirus software off and check if the issue has been solved. If the answer is yes, you need to report the issue to the vendor of your antivirus app, or you can replace the app with another antivirus software.

If the solution cannot fix the problem, you need to try the next one.

Solution 5: Check Your Windows Update

Sometimes, “error 1068: the dependency service or group failed to start” is simply caused by something out-of-date in your Windows. To solve it, you just need a few clicks.

Step 1: Open Settings by pressing Win + I.

Step 2: Click Update & Security to get into Windows Update.

Step 3: In Windows Update, Select check for updates. Then download the available updates and confirm the installation process.

Step 4: Restart your computer and run Windows Defender Firewall to see if error 1068 “dependency service failed to start firewall” has been removed.

Solution for Any Case

If you cannot fix error 1068 with the solutions above, you may need to reinstall your Windows 10.

By reinstalling Windows 10, you can solve the problems due to system file corruption, system settings changes, third-party software and so on. It is kind of annoying, but it is a really effective way to fight with “error 1068: the dependency service or group failed to start”.

In addition, to make sure error 1068 can be completely removed, you’d better perform a clean install.

There are two ways to achieve it:

  • Reset This PC (Remove everything)
  • Clean Install

You can get instructions on how to use Reset this PC (Remove everything) to fix error 1068 in the following text.

Note: You need to prepare an installation disk or USB drive if you use Clean install, and everything on your system partition will be erased. Reset this PC (Remove everything) is more convenient and it has the same function as Clean install.

Before you start to reset your PC, youd better back up your data.

You can use a USB flash drive or an external hard drive to make backup. Pay attention that the backup device needs to be large enough to store all the files and programs in your disk.

The guide on how to use an external hard drive is displayed in the post. An external hard drive is useful in many aspects such as files storage and data backup.

Step 1: In the first place, download and install MiniTool Partition Wizard.

Tip: To copy the system disk, you need to use MiniTool Partition Wizard Pro Edition and then follow the steps below.

Step 2: Launch the tool and select Copy Disk Wizard from the action panel.

Step 3: Follow the wizard to finish backup process.

How to clone a hard drive to SSD free in Windows 10/8/7? MiniTool software offers the best way to clone a hard drive from HDD to SSD or a new one.

Tip: If you back up files before Windows reinstallation, you won’t need to be worried about losing your important documents and programs.

After you back up your files, you can reset your PC to fix error 1068.

Step 1: Click Start and select the Settings icon.

Step 2: Choose Update & Security, and then click Recovery.

Step 3: Click Get started under Reset this PC section.

Step 4:Choose Remove everythingto reset this PC, and then follow the pop-up instructions.

Tip: There are two options when you reset your PC. Keep my files will remove apps and settings, but keep your personal files. Remove everything removes all of your personal files, apps and settings. To fully clean your drive and fix error 1068, you need to remove everything.

Then Windows 10 will reset your PC and perform a clean install. Once it’s done, you can go and check whether error 1068 has been fixed.

Windows 10 reset stuck at 1/12/66/99 percent? Here are 3 useful methods to fix Windows 10 reset stuck on spinning circle black screen.

Bottom Line

If you are bothered by “error 1068: the dependency service or group failed to start”, don’t be annoyed. You can fix it with solutions above.

If you have better ways to solve this problem, you can contact [email protected]. For any questions, you are free to post it in the comment section below and you will be replied as soon.

Error 1068 FAQ

Error 1068 is described as “the dependency service or group failed to start”. When you attempts to connect your system to a wireless network or when you try to start Windows Firewall, this error may appear and stop your operation.
  1. Open Control Panel and select Network and Internet.
  2. Choose Network and Sharing Center.
  3. Click Troubleshoot problems and select Internet Connections.
  4. Then follow the onscreen instructions to finish the process.
Coments are closed
Scroll to top