2015

Digitally accurate and fully programmed, SRD-Series open-casting systems utilize state-of-the-art PLCs and servomotor-controlled rotary gear metering pumps. Optionally, mechanical flowmeters or Coriolis mass flowmeters are included for automatic, closed loop-feedback ratio control and correction. You enter digital presets at the menu-driven touchscreen to make process control recipes. Digital presets include your required ratio, shot-size, output rate, temperatures, vacuum in the tanks and mixer-speed. Hundreds of numbered process control recipes can be saved and selected to run all of your cast parts.

Srd Series Schedulegames123 Nr2003 Designs Download

Games123 NR2003 Designs. Welcome to Sim Racing Design, your source for sim racing discussions and downloads. NR2003 editing tools and PC troubleshooting. 2020 SRD SuperTruck Series.

SRD open-casting systems meter, mix and dispense cast urethane elastomers, epoxies, polyesters and vinyl esters, among other multiple-component resin formulations. Open cast pours are made with the pour tube positioned above the open-top mold. Open cast products include golf balls, wind turbine blades, wheels of all types, paper-making rolls, hydro cyclones, cast current transformers and sonar-absorbing submarine hull coatings.

Srd Series Schedulegames123 Nr2003 Designs

Each of the positive-displacement rotary gear pumps on the SRD-Series system is of the highest quality available and each is driven with an independent, digitally-controlled servomotor drive. Metering pump sizes are selected and installed to match your required ratio range and mixed-material output requirements.

When the footswitch is depressed, the servomotors turn the rotary pumps, displacing on-ratio streams of the component materials through the mixer and into the open mold. Various system configurations provide outputs from 1 to 50 lbs/min and more. Ratios can range from 1:1 to 1:200. Two, three and four-component systems are standard and automatic color metering is available.

Heated and agitated degassing tanks feed the materials under constant positive pressure to the precision metering pumps. This air-bubble-free positive material pressure from the tanks is created by 1) dry nitrogen over-pressure on the degassing tanks or 2) by rotary (or piston-type) feed pumps mounted below our constant-vacuum thin-film resin degassers. These feed pumps eliminate the need for dry nitrogen over-pressure on the surface of the resin material.

Continuous component recirculation is optionally provided at the mixer injectors to keep the materials in constant motion; continuously diverting the independent on-ratio streams of material back to their respective material supply tanks when the machine is not pouring parts. Ratio-taking ports are provided at the mixer for manually checking ratio.

All heated compartments for the pumps and the mixer have removable slide-out panels for easy access to all system components. Heaters are ceramic-enclosed infrared type, which allow the system to be more easily modified at a later date to include third and fourth components.

Srd Series Schedule Games123 Nr2003 Designs Free

SolidWorks 3D advanced modeling software is used to design all of our SRD-Series open-casting systems. We work closely with our customers to provide them with the very best SRD system configuration for their application.

Coments are closed
Scroll to top